KitchenAid KRFF707ESS Use & Care Guide - Page 11
Location Requirements
![]() |
View all KitchenAid KRFF707ESS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Right-Hand Side Drawer Glide ■ To raise the drawer front, turn screw (B) counterclockwise. ■ To lower the drawer front, turn screw (B) clockwise. 6. Insert the Phillips screwdriver into screw (A), and turn clockwise to tighten the drawer front. 7. Close the refrigerated drawer to check the alignment. Repeat steps 2 through 6 until the drawer fronts are level. Step 2 - Adjust the Drawer Fronts Side-to-Side IMPORTANT: Each refrigerated drawer can be adjusted side-toside on both the left and right side. 5. Reposition the clip (A) onto the glide bracket (B) in the direction you want to move the drawer front. Make sure that the glide bracket is vertically level. 6. Release the lever (C) to lock the glide bracket into position. 7. Repeat steps 3 through 6 for the other side of the drawer front. NOTE: Adjust the clip (A) on the top of the second glide bracket (B) so that it is in the same position as the side you adjusted first 8. Close the drawer and visually inspect the gap. Repeat steps 2 though 7 until the drawer fronts are aligned. Final Steps 1. Replace the interior drawer bins. NOTE: The bins must be placed into the drawers correctly, so that the refrigerated drawers will close and operate properly. See "Remove and Replace Drawer Fronts." 2. Close the refrigerated drawers. Location Requirements WARNING 1. With the drawers closed, identify the drawer that is not aligned. 2. Open the drawer to its full extension. Grasp the sides of the interior bin, and then lift it up and out to remove (see step 1 for further details). 3. Locate the drawer glide brackets (see step 1 for further details). 4. Starting with the glide bracket closest to the vertical gap, press and hold the release lever (C) up. With your other hand, lift the door clip (A) from the bracket (B). A Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from refrigerator. Failure to do so can result in death, explosion, or fire. IMPORTANT: This refrigerator is designed for indoor, household use only. To ensure proper ventilation for your refrigerator, allow for a ¹⁄₂" (1.25 cm) of space on each side and at the top. Allow for a 1" (2.54 cm) space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 3³⁄₄" (9.5 cm) minimum space between the refrigerator and wall to allow the door to swing open. A B B C A. Drawer front clip B. Drawer glide bracket C. Release lever 11
![](/manual_guide/products/kitchenaid-krmf606ess-use-care-guide-162055e/11.png)