KitchenAid KRFF707ESS Use & Care Guide - Page 24

Dispensing

Page 24 highlights

NOTE: Depending on your model, a measuring cup may be provided. NOTE: If overfilling or spilling occurs, discard the water and press ICE/WATER "Back" to restart the calibration process. A B A. Water dispenser paddle B. Measuring cup (1 cup) 2. Press and hold the OPTIONS and LOCK buttons at the same time for 3 seconds. The words "Back" and "1 Cup" will appear on the display screen. Also, the Calibrate Measured Fill icon will illuminate and remain lit while the Measured Fill feature is being calibrated. 4. When 1 cup of water has been correctly dispensed into the measuring cup, press the MEASURED FILL button under the word "Confirm" to confirm the calibration. NOTE: You may press ICE MODE "Back" at any time to exit calibration mode. The Calibrate Measured Fill icon will disappear. A 3. Press and release the dispenser paddle, as needed, to dispense water to the 1 cup fill line. A. 1 cup of water 5. When Measured Fill calibration has been confirmed the icons will disappear and the display will return to the home screen. Dispensing Press ICE/WATER to toggle through the following choices in a continuous loop: ■ Water (default) - Dispenses water ■ Cubed - Dispenses cubed ice. ■ Crushed - Dispenses crushed ice NOTES: ■ The word "ICE" appears on the display screen when either crushed or cubed ice is selected. ■ For crushed ice, cubes are crushed before being dispensed. This may cause a slight delay when dispensing crushed ice. Noise from the ice crusher is normal, and pieces of ice may vary in size. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120

24
24
NOTE:
Depending on your model, a measuring cup may be
provided.
2.
Press and hold the OPTIONS and LOCK buttons at the same time
for 3 seconds. The words “Back” and “1 Cup” will appear on the
display screen. Also, the Calibrate Measured Fill icon will illuminate
and remain lit while the Measured Fill feature is being calibrated.
NOTE:
You may press ICE MODE “Back” at any time to exit
calibration mode. The Calibrate Measured Fill icon will disappear.
3.
Press and release the dispenser paddle, as needed, to dispense
water to the 1 cup fill line.
NOTE:
If overfilling or spilling occurs, discard the water and press
ICE/WATER “Back” to restart the calibration process.
4.
When 1 cup of water has been correctly dispensed into the
measuring cup, press the MEASURED FILL button under the word
“Confirm” to confirm the calibration.
5.
When Measured Fill calibration has been confirmed the icons will
disappear and the display will return to the home screen.
Dispensing
Press ICE/WATER to toggle through the following choices in a
continuous loop:
Water (default) - Dispenses water
Cubed - Dispenses cubed ice.
Crushed - Dispenses crushed ice
NOTES:
The word “ICE” appears on the display screen when either
crushed or cubed ice is selected.
For crushed ice, cubes are crushed before being dispensed.
This may cause a slight delay when dispensing crushed ice.
Noise from the ice crusher is normal, and pieces of ice may
vary in size.
A. Water dispenser paddle
B. Measuring cup (1 cup)
A
B
A. 1 cup of water
A