KitchenAid KURO24RSBX Use & Care Guide - Page 4
Installation Instructions - specifications
UPC - 883049028934
View all KitchenAid KURO24RSBX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INSTALLATION INSTRUCTIONS Tools and Parts TOOLS NEEDED: Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. ■ Cordless drill ■ Scissors and ³⁄₈" Brad point doweling drill bit ■ Phillips screwdriver ■ Rotary tool ■ Masking tape ■ Tape measure ■ Petroleum jelly NOTE: To inlay the overlay hooks into the panel, it is recommended that you use a rotary tool to rout the surface where the overlay hooks will be placed. 4⁷⁄₈" (124 mm 23.3 mm) 20 mm) 4 11.2 cm) PARTS NEEDED: Custom Overlay Door Panel-See "Overlay Panel-Rear View." Hardware (Optional) PARTS SUPPLIED: ■ Flat-head screws (8) ■ Overlay plates (2) ■ Round-head screws (8) ■ Overlay hooks (4) A 29 75.8 cm) Custom Overlay Panel If you plan to install a custom overlay panel, you will need to create the panel yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications. IMPORTANT: ■ The thickness of the wood overlay must be ³⁄₄" (19 mm). ■ Overlay panel must not weigh more than 20 lbs (9.07 kg). ■ Overlay panel weighing more than recommended may cause damage to your refrigerator. Overlay Panel-Rear View 1. Create a custom overlay panel using the dimensions shown. 2. Rout four depressions into the overlay panel, where indicated, to attach the overlay hooks. 2 mm) 10 mm) 3" (76 mm) 23⁵⁄₈" (60.0 cm) A. Overlay hook locations Install Overlay Hooks Using a Phillips screwdriver and eight flat-head screws attach the overlay hooks to the back of the overlay panel. See "Overlay Panel-Rear View," for overlay hook locations. A A. Overlay hooks (4) 4