KitchenAid KURO24RSBX Use & Care Guide - Page 9

Refrigerator, Features, Door Features - 24

Get KitchenAid KURO24RSBX - 24inch Refrigerator With 5.7 cu. ft PDF manuals and user guides
UPC - 883049028934
View all KitchenAid KURO24RSBX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Using the Control For your convenience, your refrigerator control is preset at the factory. When you first install your refrigerator, make sure that the control is still preset to the mid-setting as shown. Lower Shelf To Remove and Replace Lower Shelf: 1. Remove the shelf by lifting it up and pulling it forward. 2. Replace the shelf by lowering it on the guides. Adjusting Controls The mid-setting indicated in the previous section should be correct for normal usage. The control is set correctly when beverages are as cold as you like. If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the refrigerator colder, adjust the control to the next higher setting. To make the refrigerator less cold, adjust the control to the next lower setting. REFRIGERATOR FEATURES Wire Storage Bin To Remove and Replace Wire Storage Bin: 1. Remove the bin by pulling it forward. 2. Replace the bin by sliding it back into place. Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping. Split-level Shelf Your refrigerator has an adjustable split-level shelf for maximum storage capability. To Remove and Replace Shelf: 1. Remove the shelf by lifting it up and out of the shelf brackets. Remove the shelf. 2. Replace the shelf by inserting it into the shelf brackets. NOTE: Be sure that the shelf is level. DOOR FEATURES Can Rack To Remove and Replace Can Rack: 1. Remove the can rack by tilting it forward and pulling it out. 2. Replace the rack by placing the rear of the rack under the support on the door and sliding into place. Door Bin The door bin can be positioned either on the upper door or the lower door. To Reposition the Door Bin: 1. Remove the door bin by tilting it forward and pulling it out. 2. Replace the bin by placing the rear of the bin under the support on the door and sliding into place. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
9
Using the Control
For your convenience, your refrigerator control is preset at the
factory. When you first install your refrigerator, make sure that the
control is still preset to the mid-setting as shown.
Adjusting Controls
The mid-setting indicated in the previous section should be
correct for normal usage. The control is set correctly when
beverages are as cold as you like.
If you need to adjust the temperature, wait at least 24 hours
between adjustments and then recheck the temperature.
To make the refrigerator colder, adjust the control to the next
higher setting. To make the refrigerator less cold, adjust the
control to the next lower setting.
REFRIGERATOR
FEATURES
Split-level Shelf
Your refrigerator has an adjustable split-level shelf for maximum
storage capability.
To Remove and Replace Shelf:
1.
Remove the shelf by lifting it up and out of the shelf brackets.
Remove the shelf.
2.
Replace the shelf by inserting it into the shelf brackets.
NOTE:
Be sure that the shelf is level.
Lower Shelf
To Remove and Replace Lower Shelf:
1.
Remove the shelf by lifting it up and pulling it forward.
2.
Replace the shelf by lowering it on the guides.
Wire Storage Bin
To Remove and Replace Wire Storage Bin:
1.
Remove the bin by pulling it forward.
2.
Replace the bin by sliding it back into place.
DOOR FEATURES
Can Rack
To Remove and Replace Can Rack:
1.
Remove the can rack by tilting it forward and pulling it out.
2.
Replace the rack by placing the rear of the rack under the
support on the door and sliding into place.
Door Bin
The door bin can be positioned either on the upper door or the
lower door.
To Reposition the Door Bin:
1.
Remove the door bin by tilting it forward and pulling it out.
2.
Replace the bin by placing the rear of the bin under the
support on the door and sliding into place.
Important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small,
pebble-size pieces. This is normal. Glass shelves and covers
are heavy. Use both hands when removing them to avoid
dropping.