Kodak 5300 User Manual - Page 6

Important - printhead

Page 6 highlights

Install Printhead d) Carefully remove and discard the black plastic shield and the orange protective cap. IMPORTANT: Do not touch the copper-colored contacts. e) Place the printhead into the carriage. Insert at the angle shown. f) Push firmly against the back wall of the printhead until it clicks into place. Tip: The printhead requires a firm push and makes an audible click when locked into place. 6 www.kodak.com/go/aiosupport

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

f)
Push firmly against the back wall of the printhead
until it clicks into place.
Tip:
The printhead requires a firm push and makes
an audible click when locked into place.
e)
Place the printhead into the carriage. Insert at the
angle shown.
d)
Carefully remove and discard the black plastic shield
and the orange protective cap.
IMPORTANT:
Do not touch the copper-colored
contacts.
www.kodak.com/go/aiosupport
6
Install Printhead