Kodak DC3400 User Manual - Page 107
Slide the POWER switch to the right to turn, the camera serial port.
UPC - 041771146702
View all Kodak DC3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
If your camera came with a serial cable for a Macintosh computer instead of the serial adapter plug, connect the end of the serial 7 cable labelled MAC into the available serial port on the back of the computer. Serial ports on Macintosh computers are usually referred to as modem or printer ports. If the ports are not labeled, see your computer User's Guide for a diagram that illustrates all of the external ports. 4 Open the serial/USB port door on the side of the camera. 5 Plug the other end of the serial cable into the camera serial port. 6 Slide the POWER switch to the right to turn on the camera. If you get a message on your computer stating that you are not connected, refer to the Connect.PDF document installed with the software, or the online help for troubleshooting information. 99