Kodak DC3400 User Manual - Page 125
The Sharpness setting, The White Balance
UPC - 041771146702
View all Kodak DC3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Camera Problem Cause Solution Pictures remaining number The image Resolution The camera is does not decrease after taking and Quality settings operating normally. 8 a picture. does not take up Continue taking sufficient space to pictures. decrease the picture remaining number. Picture is not clear. The lens is dirty. Clean the lens. See page 133. Subject too close Stand at least 1.6 ft when taking picture. (.5m) away. Subject or the camera Hold camera steady moved while the until the picture is picture was taken. taken. The subject is too far Move so the subject is away for the flash to less than 13 ft be effective. (4.0 m) away. Picture is tinted green, blue, or red-orange. The Sharpness setting Change the Sharpness may be set setting to Standard. incorrectly. See page 44. The White Balance setting is set incorrectly. Change the White Balance setting to Auto. See page 38. Check the White Balance default setting. See page 78. 117