Kodak DC3400 User Manual - Page 124
Camera, Problem, See Check
UPC - 041771146702
View all Kodak DC3400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Camera Problem Cause Solution Picture is too light. The flash is not needed. Change to Auto flash. See page 19. Check the flash default setting. See page 77. The subject is too close when the flash was used. Move so there is at least 1.6 ft (0.5 m) between the camera and the subject. The light sensor is covered. Hold camera so your hands or other objects do not cover light sensor. The Exposure Compensation is set incorrectly. Decrease the Exposure Compensation. See page 28. Check the Exposure Compensation default setting. See page 80. Stored pictures are damaged. Camera memory card Be sure Ready light is removed when Ready not blinking before light was blinking. removing card. Picture is black and white, The Effects setting is sepia toned, or has too much set incorrectly. contrast. Change the Effects setting to No Effects. See page 32. Check the Effects default setting. See page 82. 116