Kodak DP800 User's Manual - Page 11
Connecting the Projector to your video player
View all Kodak DP800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5 Connecting the Projector to your video player Using composite video Plug panel LEFT RGB INPUT COMPOSITE VIDEO SUPERVIDEO RIGHT MIC AUDIO IN PC/COMMON COMP.VIDEO S.VIDEO AUDIO OUT Connect to video out part of VCR R L Connect to VCR audio out Fig. 6. Connecting to a composite video source 1. Find the Composite video cable, and the audio cable. See page 6, All cables and adapters are provided with the Projector. 2. Make sure that the video source and the Projector are switched off. Connect the Composite video cable (see page 6) from the Video out connector of the video source to the Composite video connector on the Projector plug panel, see fig. 6. Connect the audio cable from the Audio out connectors of the video source to the Composite Audio in connectors on the Projector. Connect the red plug to the red connector, and the other plug to the white connector. Red is the right stereo channel. 3. Connect the power cable from the Projector to the wall outlet. 4. When all the connections are done and verified, switch on the video source, and then switch on the Projector. 5. The Projector will now automatically display the pictures from the video source. If not, see the section Trouble shooting. You can connect external speakers to the Projector from the Audio out connectors on the plug panel. 11 Contents