Kodak DX4330 User's Guide - Page 85
Adjust the camera Video Out, than 11.2 ft 3.4 m between
View all Kodak DX4330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 10 Camera Problem Cause Solution Picture is not clear. The lens is dirty. Clean the lens (page 92). Subject too close when taking picture. Move so there is at least 2.0 ft (0.6 m) between the camera and the subject, or at least 2.8 in. (7.0 cm) in Close-up mode. Subject or the camera Hold the camera steady moved while the picture while taking the picture. was taken. The subject is too far Move so there is no more away for the flash to be than 11.2 ft (3.4 m) between effective. the camera and the subject; 6.6 ft (2.0 m) in Telephoto. Slide show does Video Out setting is not run on external incorrect. video device. Adjust the camera Video Out setting (NTSC or PAL, page 52). External device is set Refer to the external device's incorrectly. user's guide. 73