Kodak I1310 User Manual

Kodak I1310 - Document Scanner Manual

Get Kodak I1310 - Document Scanner PDF manuals and user guides
UPC - 041771220167
View all Kodak I1310 manuals
Add to My Manuals
Save this manual to your list of manuals

Kodak I1310 manual content summary:

  • Kodak I1310 | User Manual - Page 1
  • Kodak I1310 | User Manual - Page 2
    scanner and disconnect the power cord from the power outlet. Contact Kodak Service. • Do not disassemble or modify the scanner or the AC power adapter. • Do not move the scanner is recyclable. • Parts are designed for reuse and recycling. • The Kodak i1200/i1300 Plus Series Scanners are Energy Star
  • Kodak I1310 | User Manual - Page 3
    to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
  • Kodak I1310 | User Manual - Page 4
    OVERVIEW 1-1 INSTALLATION 2-1 SCANNING 3-1 MAINTENANCE 4-1 TROUBLESHOOTING 5-1 APPENDICES
  • Kodak I1310 | User Manual - Page 5
    Plus Scanners also support the optional Kodak A4 Flatbed Accessory or Kodak A3 Flatbed Accessory. The i1200/i1300 Plus Series Scanners include these models: • Kodak i1210 Plus Scanner • Kodak i1220 Plus Scanner • Kodak i1310 Plus Scanner • Kodak i1320 Plus Scanner NOTE: This User's Guide provides
  • Kodak I1310 | User Manual - Page 6
    documentation is also available: • Installation Guide - provides a step-by-step procedure for installing the scanner. • Scanning Setup Guides - the TWAIN Satasource and ISIS Driver are included with the Kodak i1200/i1300 Plus Series Scanners. The Scanning Setup Guides explain how to use basic image
  • Kodak I1310 | User Manual - Page 7
    Before you begin open the box and check the contents: • Kodak i1210 Plus, i1220 Plus, i1310 Plus or i1320 Plus Scanner • Output tray • Optional output tray kit • USB 2.0 Printed User's Guide, English - Printed Maintenance Guide, English - Installation Guide - Service & Support Contact Information
  • Kodak I1310 | User Manual - Page 8
    or flashes indicating scanner status. • Steady green: ready to scan • Flashing green: preparing to scan • Flashing red: error indication such as, Scanner Cover Open, in conjunction with the Function window displaying an "E". See Chapter 5, Troubleshooting for error code descriptions. NOTE: The
  • Kodak I1310 | User Manual - Page 9
    to the scanner. USB port - connects the scanner to the PC. Flatbed port - connects the optional flatbed accessory to the scanner. Security lock port - connects a security lock to the scanner. You can purchase a standard security lock at an office supply store. Refer to the instructions provided with
  • Kodak I1310 | User Manual - Page 10
    sensor Feed module cover Imaging area Side guides Feed module Rollers Separation module Separation module release lever Gap release lever Scanner cover release lever Side guides - slide the guides back and forth to accommodate the size of documents you are scanning. Paper present sensor
  • Kodak I1310 | User Manual - Page 11
    already performed all of the steps in the Installation Guide, skip this section. Installing the Kodak Driver Software - Windows operating systems 1. Insert the Kodak i1200/i1300 Plus Series Scanners Installation CD in the CD-ROM drive. The installation program starts automatically. NOTE: The i1200
  • Kodak I1310 | User Manual - Page 12
    the CD-ROM drive. Installing the Kodak Driver Software - Linux operating systems Linux drivers can be found on the Kodak website. Visit www.Kodak.com/go/disupport to obtain the most recent Linux drivers and installation procedures. Install the driver software before connecting the scanner to your
  • Kodak I1310 | User Manual - Page 13
    Attaching the standard output tray 1. Slide the output tray underneath the scanner platform along the center guide. 2. Push it all the way back until it snaps into place. A-61560 January 2010 2-3
  • Kodak I1310 | User Manual - Page 14
    the optional output tray kit The Kodak i1200/i1300 Plus Series Scanners are shipped with an output tray kit, which includes: an output tray extension, dangler and clip. This output tray is optional but is recommended when scanning large stacks of documents. clip dangler output tray extension To
  • Kodak I1310 | User Manual - Page 15
    3. Slide the output tray extension underneath the scanner platform along the center guide and push it back until it is securely in place. 4. Install the clip by sliding it up into the scanner between the slots at the center of the scanner and snap it in place. NOTE: Once you have installed this
  • Kodak I1310 | User Manual - Page 16
    5. Snap the dangler onto the clip. 6. Slide the standard output tray along the rail underneath the output tray extension and push it back until it is securely in place. 2-6 A-61560 January 2010
  • Kodak I1310 | User Manual - Page 17
    and USB cable When the drivers have been installed, connect the power supply, power cord and USB cable to the scanner. Refer to the illustration below for making proper connections. Make sure the power outlet is located within 1.52 metres (5 feet) of the scanner and is easily accessible. 1. Select
  • Kodak I1310 | User Manual - Page 18
    green indicator on the front of the scanner will flash as the scanner goes through a series of self tests. Please wait while the operating system synchronizes the scanner with the installed software. When the installation process is complete and ready to scan, the LED indicator will stop flashing
  • Kodak I1310 | User Manual - Page 19
    Getting your scanner ready to scan 3-1 Getting your documents ready to scan 3-3 Selecting your scanning application 3-4 Scanning with Smart Touch 3-4 Getting your scanner ready to scan 1. Be sure the scanner is on and ready to scan (green indicator light is on and constant). IMPORTANT
  • Kodak I1310 | User Manual - Page 20
    to close the input tray, you can easily feed documents one at a time. 5. Adjust the output tray to accommodate your scanning needs. • The standard output tray can be positioned so it lies flat on the table. This position works well for scanning a few pages at a time. 3-2 A-61560 January 2010
  • Kodak I1310 | User Manual - Page 21
    • For scanning jobs of more than 5 pages, put the scanner in the downward position when using the output tray extension. • The output tray can be extended to accommodate documents up to 14 inches in length. Getting your documents ready to scan 1. Standard paper size documents feed easily through
  • Kodak I1310 | User Manual - Page 22
    was installed when you installed the Kodak Driver Software. The rest of the above scanning applications are provided on separate CDs that were included with your scanner. Refer to the application's User's Guide for instructions on how to install and use it. Scanning with Smart Touch The following
  • Kodak I1310 | User Manual - Page 23
    4-3 Cleaning the feed module 4-4 Vacuuming the scanner 4-6 Cleaning the imaging area 4-6 Running a transport cleaning sheet and hold the scanner cover release lever and pull the scanner cover down. 3. When you finish cleaning the scanner or replacing a part, close the scanner cover with both
  • Kodak I1310 | User Manual - Page 24
    on your images, it is time to clean your scanner. The section entitled, "Supplies and consumables" at the end of this chapter provides a listing of the supplies required to clean your scanner. IMPORTANT: Use only non-flammable cleaners such as those provided through Kodak Parts Services. Do not
  • Kodak I1310 | User Manual - Page 25
    module The separation module should be removed from the scanner for best cleaning results. NOTE: When removing or 1. Push the separation module up to snap out and lift it out of position. 2. Manually rotate and wipe the separation module tires with a roller cleaning pad. A-61560 January 2010 3.
  • Kodak I1310 | User Manual - Page 26
    4. Insert the separation module by aligning the tabs with the slots and snapping it into position. Cleaning the feed module NOTE: Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Pull against the raised edge of the feed module cover and lift
  • Kodak I1310 | User Manual - Page 27
    2. Rotate the feed module forward and push it to the left to lift it out of position. 3. Manually rotate and wipe the feed module tires with a roller cleaning pad. 4. Inspect the feed module. If the feed module tires show signs of wear or
  • Kodak I1310 | User Manual - Page 28
    fit it into position. Be sure the gears are aligned and it snaps into place. Roll the feed module back into place. Vacuuming the scanner Cleaning the imaging area 7. Reinstall the feed module cover by aligning the tabs with the slots and pushing it back into position until it snaps into place
  • Kodak I1310 | User Manual - Page 29
    , turn it over (adhesive side facing the input tray) and scan it again. 6. Open the scanner cover and wipe the imaging area with a lint-free cloth. 7. Close the scanner cover with both hands. 8. Check your image quality. 9. If necessary, repeat this procedure until all residue is removed from the
  • Kodak I1310 | User Manual - Page 30
    recommended schedule for changing tires. Nominal tire life is approximately 125,000 pages. Usage figures are not guaranteed. Customer-operating environments, document type, the condition of documents being scanned, and not following the recommended cleaning and replacement procedures, can cause the
  • Kodak I1310 | User Manual - Page 31
    2. Holding onto the separation module, rotate the release lever back so you can access the separation roller. CAUTION: Use caution as the release lever is spring-loaded and will snap back if you do not hold it in place. 3. Remove the separation roller from the separation module housing. 4. Remove
  • Kodak I1310 | User Manual - Page 32
    module from the scanner by following the pre-separation pad and pull it out of the separation module. 4-10 5. Discard the worn pre-separation pad. 6. Align the side the slots until the pre- separation pad flap rests lightly against the separation module tires. 8. Reinstall the separation module
  • Kodak I1310 | User Manual - Page 33
    Replacing the feed module and tires NOTE: The paper present sensor is located to the right of the feed module. Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Lift the tab of the feed module cover and remove it from its position. A-61560
  • Kodak I1310 | User Manual - Page 34
    2. Rotate the feed module forward and push it to the left to lift it out of position. • If you are replacing the feed module, insert the new feed module by aligning the pins and pushing it toward the left to fit it into position. Be sure the gears are aligned and it snaps into place, then go to
  • Kodak I1310 | User Manual - Page 35
    cover down until it snaps into place. If you are experiencing multi-feeds or document jams, it may be necessary to adjust the pre-separation roller tension. 1. Remove the separation module from the scanner by following the steps described previously in "Replacing the separation module and tires
  • Kodak I1310 | User Manual - Page 36
    order supplies. Description Kodak Feed Rollers / for i1200/i1300 Plus Series Scanners (qty. 12) Kodak Separation Module / for i1200/i1300 Plus Series Scanners Kodak Feed Module / for i1200/i1300 Plus Series Scanners Kodak Digital Science Roller Cleaning Pads (qty 24) Kodak Digital Science Transport
  • Kodak I1310 | User Manual - Page 37
    5 Troubleshooting Contents Problem solving Problem solving 5-1 LED error codes 5-3 Contacting Service 5-4 Occasionally you may encounter a situation with your scanner where it may not function properly. Use the chart below as a guide to check possible solutions to help you resolve the situation
  • Kodak I1310 | User Manual - Page 38
    . with Microsoft Windows Vista Unable to scan using Microsoft Office Select the scanner named: Document Imaging 2007 using the WIA KODAK Scanner: i1210/i1220 or driver KODAK Scanner: 1310/i1320 from the Scanner drop-down list. Linux operating systems - only The number of pages value is not
  • Kodak I1310 | User Manual - Page 39
    of the error codes that may be displayed in the Function window. When an error occurs, the red indicator will blink and a number is displayed in the Function window. Code E 0 E 1 - E 5 E 7; E 8 Problem USB cable is not connected. Scanner failure E 6 Scanner cover open E 9 Document jam Remedy
  • Kodak I1310 | User Manual - Page 40
    Contacting Service 1. Visit www.Kodak.com/go/disupport to obtain the most current phone number for your country. 2. When calling, please have the following information ready: • A description of your problem. • The scanner model and serial number. • Computer configuration. • Software application you
  • Kodak I1310 | User Manual - Page 41
    system requirements. Scanner Type/Speed Kodak i1210 Plus Scanner - a simplex scanner which provides color scanning up to 30 pages per minute; black and white and grayscale scanning at up to 45 ppm at 200 dpi. Kodak i1220 Plus Scanner - a duplex scanner which provides color scanning up to 30 pages
  • Kodak I1310 | User Manual - Page 42
    Windows Vista (32-bit and 64-bit); SP2 - Microsoft Windows XP SP2/SP3 (32-bit) - Microsoft Windows XP SP2 x64 Edition - Microsoft Windows 2003 Server R2 x64 Edition (TWAIN only) - Linux Ubuntu 9.04 - Linux SUSE 11.1 - Linux Fedora 10 Included Drivers: • Windows operating systems: TWAIN, ISIS
  • Kodak I1310 | User Manual - Page 43
    user operating systems or applications software, systems engineering, relocation, reconstruction of data, or removal of the product or any component (including breakage of a connector, cover, glass, pins, or seal); (c) from service, modification or repair not performed by Kodak or a service provider
  • Kodak I1310 | User Manual - Page 44
    run some simple, self-diagnostic tests and report the resulting status and error code messages. This will assist the Response Center in determining if the problem is the Kodak Scanner or another component and if the problem can be resolved over the phone. If the Response Center determines a hardware
  • Kodak I1310 | User Manual - Page 45
    proper receipt and credit of the defective product. Depot service If the Kodak Scanner is not eligible for Advance Exchange or On-Site Service, an eligible purchaser may utilize our Depot Repair Service. The eligible purchaser will be instructed to ship the product to the nearest authorized Depot
  • Kodak I1310 | User Manual - Page 46
    on Kodak Scanners: Website: www.Kodak.com/go/docimaging For U.S. Service, Repair and Technical Assistance by Telephone: Telephone technical support is available Monday-Friday between the hours of 5 a.m. to 5 p.m. excluding Kodak holidays. Phone: (800) 822-1414 For Technical Documentation and
  • Kodak I1310 | User Manual - Page 47
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47