Kodak I1310 User Manual - Page 39

Problem Possible Solution Linux operating systems - only If the following Communications error is Before checking cable connections and performing the power down displayed when you select a scanner sequence: after initially installing Linux drivers on 1. Click OK on the message. Fedora 7: Please check to make sure the 2. Select System>Administration>SELinux Management. scanner has powered up 3. Enter your root/superuser password. The SELinux Administration successfully and the cable is screen will be displayed. securely attached to both the PC and the scanner. If you are still having a problem, power down the scanner, then power up the scanner, wait for it to finish initializing and try again. LED error codes 4. Select Permissive from the System Default Enforcing mode dropdown list. 5. Select Permissive from the Current Enforcing mode drop-down list. 6. Close the SELinux Administration screen and try again. Following is a listing of the error codes that may be displayed in the Function window. When an error occurs, the red indicator will blink and a number is displayed in the Function window. Code E 0 E 1 - E 5 E 7; E 8 Problem USB cable is not connected. Scanner failure E 6 Scanner cover open E 9 Document jam Remedy Be sure the USB cable is securely connected to the scanner and PC. Turn the scanner off, then on again. Restart the scanning application and try again. If the problem persists, contact Kodak Service. Close the scanner cover. Open the scanner and remove any paper in the paper path. NOTE: The numbers 1-9 may be displayed when the scanner's LED is green. These are not error codes; they are function numbers. Used together with the Scroll and Start buttons and Smart Touch functionality, the function numbers can greatly improve your ease of use. A-61560 January 2010 5-3