Kodak Kodak Printer Dock plus User Guide - Page 16
Refreshing the Ni-MH rechargeable battery pack, NOTE: Refreshing works with the Kodak EasyShare Ni-MH - help
UPC - 417712678654
View all Kodak Kodak Printer Dock plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setting up your EasyShare digital camera Refreshing the Ni-MH rechargeable battery pack If you are getting fewer than 20 pictures per charge with your Ni-MH rechargeable battery pack, follow the tips under Extending battery life, page 8. If these don't help, the battery pack needs to be refreshed. The refresh cycle completely discharges the battery pack, then fully recharges it. NOTE: A full refresh cycle can take up to 8 hours, depending on how much charge is left in your battery pack. For best results, refresh the battery pack overnight; do not interrupt the discharge/recharge cycle. 1 Make sure the Ni-MH rechargeable battery pack is in the camera. 2 Place the camera on the printer dock (see page 9). 3 Press and hold the Battery charging lights/Refresh button, , until the Battery charging lights begin flashing green (approximately 5 seconds). The charging lights monitor the refresh status: Descending blinking Discharging battery pack green lights (lights turn off as discharging progresses). Ascending steady green lights Charging battery pack (lights turn on as charging progresses). Charging is complete when all three lights are lit. NOTE: Refreshing works with the Kodak EasyShare Ni-MH rechargeable battery pack only; Li-Ion batteries do not require refreshing. 10 www.kodak.com/go/support