Kodak Kodak Printer Dock plus User Guide - Page 35
Transferring pictures from a PictBridge compatible device
UPC - 417712678654
View all Kodak Kodak Printer Dock plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Using the printer dock plus with a computer Transferring pictures from a PictBridge compatible device 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Open the accessory door on the printer dock. 3 If a Kodak EasyShare camera is docked, remove it. If there is a memory card in the SD/MMC card slot, remove it as well. 4 Plug the USB connector from the PictBridge compatible device into the USB device connector located on the side of the printer dock. The USB device connector light blinks while the printer dock reads the device. NOTE: If the PictBridge compatible device is already plugged in but the connection has timed-out, disconnect then reconnect the USB cable to re-establish a connection. 5 Press the Transfer button, , on the printer dock. Kodak EasyShare software opens on your computer (if it is installed). 6 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer. See the Kodak EasyShare software Help for details. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, or until the connection times-out. NOTE: With the software installed, pressing the Transfer button establishes a new drive connection for the PictBridge compatible device. You can view, copy, delete, and otherwise manage files on the new drive, as you do with other drives on your computer. See your computer documentation for details. ■ To stop transfer, press the Cancel button, . www.kodak.com/go/support 29