Home » Konica Minolta Manuals » Printers » Konica Minolta AccurioPress 6136 » Manual Viewer

Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 105

Adjustment value of same screen, same paper type, same weight, and old date, low number.

View all Konica Minolta AccurioPress 6136 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 105 highlights

3.6 Details of quality adjustment items 3 11 Press [Start] on the screen. The second scan is carried out, and the density balance adjustment value is registered. 12 When the adjustment is completed normally, the adjustment value is automatically registered, and the screen shown below is displayed. Select whether to output the adjustment chart for confirmation purposes. % The adjustment value is registered according to the following conditions. When the there is an idle registration: The adjustment value is registered in the lowest idle number. When the there is no idle registration: The adjustment value is overwritten to the number that matches the following conditions. If multiple values match the conditions, they are overwritten preferentially from the condition of a low number. (1) Adjustment value of same screen, same paper type, same weight, and old date (2) Adjustment value of same screen, same paper type, and old date (3) Adjustment value of same screen and old date (4) Adjustment value of oldest date % If [Yes] is selected, you can output a check chart. After the chart is output, follow the procedure to scan the chart; the values before and after adjust- AccurioPress 6136/6136P/6120 3-36

Section	Page
Table of contents	4
1 Daily Care	7
1.1 Daily Cleaning	7
Care timing	7
Care requirements	7
1.2 Weekly Cleaning	8
Care timing	8
Care requirements	8
1.3 Cleaning the Scanning Area	9
1.4 Cleaning the Fusing Unit	11
1.5 Cleaning the Duplex Part	14
1.6 Cleaning the Output Unit	20
1.7 Cleaning the Paper Feed Unit	23
2 Both Sides Adjust	27
2.1 What is Both Sides Adjust?	27
2.2 Adjustment flow to use paper of a new brand, weight, or size	28
2.2.1 Adjustment Timing	28
2.2.2 Adjustment Order	28
2.3 Regular adjustment flow	29
2.3.1 Adjustment Timing	29
2.3.2 Adjustment Order	29
2.3.3 Periodical Both Sides Adjustment Function	30
2.4 Adjustment flow for each job	31
2.4.1 Adjustment Timing	31
2.4.2 Adjustment Order	31
2.5 How to Operate the Both Sides Adj. Item	32
2.5.1 Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-710	32
2.5.2 [Front] Adjustment	36
2.5.3 [Scan Meas.] Adjustment	41
2.5.4 [Rotate/Skew] Adjustment	49
2.5.5 [Gap] Adjustment (Back side adjustment)	52
2.5.6 [AutoMeasure] Adjustment	57
2.5.7 Registering Paper Profile	59
2.5.8 Back Side Fine Adjustment	62
2.5.9 [Periodical Both Sides Adj.]	67
3 Quality Adjustment	71
3.1 Quality Adjustment for Image Controller	71
3.2 Regular adjustment flow (Standard)	72
3.2.1 Adjustment timing	72
3.2.2 Adjustment sequence	72
3.3 Regular adjustment flow (High accuracy)	73
3.3.1 Adjustment Timing	73
3.3.2 Adjustment Order	73
3.4 Adjustment flow to use a new type of paper	74
3.4.1 Adjustment timing	74
3.4.2 Adjustment sequence	74
3.5 Adjustment Flow when changing the screen	75
3.5.1 Adjustment timing	75
3.5.2 Adjustment sequence	75
3.6 Details of quality adjustment items	76
3.6.1 Setting of the Custom Screen	76
3.6.2 [Gamma Automatic Adj.]	78
Performing [Gamma Automatic Adj.]	78
3.6.3 [Density Balance Adjustment]	80
Adjustment flow when changing the screen	80
Saving the measured data of the density balance	90
Registering the adjusted value of the density balance in the machine	91
3.6.4 [Density Balance Auto. Adj.]	97
3.6.5 [Maximum Density Adjustment]	106
3.6.6 [Max. Density Auto Adj.]	108
3.6.7 Checking the Color Density Control Setting	110
3.6.8 [Color density manual control]	112

Match case Limit results 1 per page

3.6

Details of quality adjustment items

AccurioPress 6136/6136P/6120

3-36

Press [Start] on the screen.

The second scan is carried out, and the density balance adjustment value is registered.

When the adjustment is completed normally, the adjustment value is automatically registered, and the

screen shown below is displayed. Select whether to output the adjustment chart for confirmation pur-

poses.

The adjustment value is registered according to the following conditions.

When the there is an idle registration:

The adjustment value is registered in the lowest idle number.

When the there is no idle registration:

The adjustment value is overwritten to the number that matches the following conditions.

If multiple values match the conditions, they are overwritten preferentially from the condition of a

low number.

(1) Adjustment value of same screen, same paper type, same weight, and old date

(2) Adjustment value of same screen, same paper type, and old date

(3) Adjustment value of same screen and old date

(4) Adjustment value of oldest date

If [Yes] is selected, you can output a check chart.

After the chart is output, follow the procedure to scan the chart; the values before and after adjust-