Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 39
Press the number of each point, and use the touch panel keypad to enter the measured length.
![]() |
View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2.5 How to Operate the Both Sides Adj. Item 2 11 Check the lengths at points [2], [4], [6], and [8] on the second and third output charts. Be sure to make note of the measurement lengths. When the lengths at points [2], [4], [6], and [8] are within the respective ranges shown below, press [Close], then press [OK] to finish the adjustment. When the lengths at points [2], [4], [6], and [8] are outside the respective ranges shown below, also measure the lengths at points [1], [3], [5], and [7], then proceed to step 12. [2]: 200 mm ^ 0.3 mm [4]: 200 mm ^ 0.3 mm [6]: 200 mm ^ 0.3 mm [8]: 200 mm ^ 0.3 mm 12 Press the number of each point, and use the touch panel keypad to enter the measured length. Press [Clear] to reset the value. AccurioPress 6136/6136P/6120 2-14
![](/manual_guide/products/konica-minolta-accuriopress-6120-accuriopress-61366136p6120-daily-maintenance-guide-0b5c2b4/39.png)