Home » Konica Minolta Manuals » Printers » Konica Minolta AccurioPress 6136 » Manual Viewer

Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 110

Checking the Color Density Control Setting

View all Konica Minolta AccurioPress 6136 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

3.6 Details of quality adjustment items 3 7 When adjustment is completed, the display automatically returns to the [Maximum Density Auto Adjust- ment] screen. The measurement result is displayed in [After Adjustment]. The automatically adjusted result is displayed in [Current Data]. This value is applied to page 3-37. % Press [Measurement History] to view the measurement history (up to 30 results). % If you press [Switch Display] on the [Maximum Density Measurement History] screen, display items are switched (Display 1: [Measurement Date] and [Measured Value], Display 2: [Paper Type] and [Set Value]). 8 Press [Return] to return to the [Quality Adjustment Menu] screen. Note that the paper profile for the tray remains in the one used for registering a desired density. % When you want to make fine-adjustment after checking the result of the automatic adjustment, manually make adjustments using the Maximum Density Adjustment in the section above. 3.6.7 Checking the Color Density Control Setting You can enables the color density control and set the execution timing, etc. When using the color density control function (Adjustment of color sensor for each paper type / Color density manual control), always set the [Use Color Density Control] to [ON]. 1 On the touch panel of the main body, press [Adjustment] on the [MACHINE] screen. The [Adjustment Menu] is displayed. AccurioPress 6136/6136P/6120 3-41

Section	Page
Table of contents	4
1 Daily Care	7
1.1 Daily Cleaning	7
Care timing	7
Care requirements	7
1.2 Weekly Cleaning	8
Care timing	8
Care requirements	8
1.3 Cleaning the Scanning Area	9
1.4 Cleaning the Fusing Unit	11
1.5 Cleaning the Duplex Part	14
1.6 Cleaning the Output Unit	20
1.7 Cleaning the Paper Feed Unit	23
2 Both Sides Adjust	27
2.1 What is Both Sides Adjust?	27
2.2 Adjustment flow to use paper of a new brand, weight, or size	28
2.2.1 Adjustment Timing	28
2.2.2 Adjustment Order	28
2.3 Regular adjustment flow	29
2.3.1 Adjustment Timing	29
2.3.2 Adjustment Order	29
2.3.3 Periodical Both Sides Adjustment Function	30
2.4 Adjustment flow for each job	31
2.4.1 Adjustment Timing	31
2.4.2 Adjustment Order	31
2.5 How to Operate the Both Sides Adj. Item	32
2.5.1 Fine-adjusting the gap between side guide plates of Paper Feed Unit PF-710	32
2.5.2 [Front] Adjustment	36
2.5.3 [Scan Meas.] Adjustment	41
2.5.4 [Rotate/Skew] Adjustment	49
2.5.5 [Gap] Adjustment (Back side adjustment)	52
2.5.6 [AutoMeasure] Adjustment	57
2.5.7 Registering Paper Profile	59
2.5.8 Back Side Fine Adjustment	62
2.5.9 [Periodical Both Sides Adj.]	67
3 Quality Adjustment	71
3.1 Quality Adjustment for Image Controller	71
3.2 Regular adjustment flow (Standard)	72
3.2.1 Adjustment timing	72
3.2.2 Adjustment sequence	72
3.3 Regular adjustment flow (High accuracy)	73
3.3.1 Adjustment Timing	73
3.3.2 Adjustment Order	73
3.4 Adjustment flow to use a new type of paper	74
3.4.1 Adjustment timing	74
3.4.2 Adjustment sequence	74
3.5 Adjustment Flow when changing the screen	75
3.5.1 Adjustment timing	75
3.5.2 Adjustment sequence	75
3.6 Details of quality adjustment items	76
3.6.1 Setting of the Custom Screen	76
3.6.2 [Gamma Automatic Adj.]	78
Performing [Gamma Automatic Adj.]	78
3.6.3 [Density Balance Adjustment]	80
Adjustment flow when changing the screen	80
Saving the measured data of the density balance	90
Registering the adjusted value of the density balance in the machine	91
3.6.4 [Density Balance Auto. Adj.]	97
3.6.5 [Maximum Density Adjustment]	106
3.6.6 [Max. Density Auto Adj.]	108
3.6.7 Checking the Color Density Control Setting	110
3.6.8 [Color density manual control]	112

Match case Limit results 1 per page

AccurioPress 6136/6136P/6120

3-41

3.6

Details of quality adjustment items

When adjustment is completed, the display automatically returns to the [Maximum Density Auto Adjust-

ment] screen.

The measurement result is displayed in [After Adjustment].

The automatically adjusted result is displayed in [Current Data]. This value is applied to page 3-37.

Press [Measurement History] to view the measurement history (up to 30 results).

If you press [Switch Display] on the [Maximum Density Measurement History] screen, display items

are switched (Display 1: [Measurement Date] and [Measured Value], Display 2: [Paper Type] and [Set

Value]).

Press [Return] to return to the [Quality Adjustment Menu] screen.

Note that the paper profile for the tray remains in the one used for registering a desired density.

When you want to make fine-adjustment after checking the result of the automatic adjustment,

manually make adjustments using the Maximum Density Adjustment in the section above.

3.6.7

Checking the Color Density Control Setting

You can enables the color density control and set the execution timing, etc.

When using the color density control function (Adjustment of color sensor for each paper type / Color density

manual control), always set the [Use Color Density Control] to [ON].

On the

touch panel

of the main body, press [Adjustment] on the [MACHINE] screen.

The [Adjustment Menu] is displayed.