Konica Minolta AccurioPress 6136 AccurioPress 6136/6136P/6120 Daily Maintenanc - Page 55
Press [Exit PrintMode]., blue dash line on the front side as shown in
View all Konica Minolta AccurioPress 6136 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
2.5 How to Operate the Both Sides Adj. Item 2 7 Press [Exit PrintMode]. 8 Measure the gap between the front and back sides at each point of [a] to [d] on the [back] side (Back) on the second and third output charts. The scale resolution is 0.5mm. The black line in the figure indicates the back side and the blue dash line indicates the opposite (front) side. You can enter a value in 0.1mm increments. For example, when the black line on the back side is misaligned to the plus side by 1.5 mm from the blue dash line on the front side as shown in the figure, type "-1.5" for correction to move the black line on the back side to the minus side by 1.5 mm. Be sure to make note of the measurement values. 9 Press [a] to [d] of each point, and use the touch panel keypad or [,] / [+] to enter the measured value. AccurioPress 6136/6136P/6120 2-30