Konica Minolta FAX2900 FAX 2900/FAX 3900 Twain Driver User's Guide - Page 20
Memory Full, Communication Error, Error Messages, Message on the control panel
View all Konica Minolta FAX2900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Error Messages 6 Memory Full Message on the control panel: Cause • There is not enough memory. Communication Error Message on the PC screen: Remedy • Press any key on the control panel of the copier. Cause Remedy • PC or copier system crash during communication. • USB cable does not connect properly during communication. 1. Turn the copier off, and then check if the USB cable is connected properly or not. 2. After checking the USB cable carefully, turn the copier on again. 3. If the problem persists, call your service representative. 6-3
Error Messages
6
6-3
Memory Full
Message on the control panel:
Communication Error
Message on the PC screen:
Cause
Remedy
•
There is not enough memory.
•
Press any key on the control panel of the
copier.
Cause
Remedy
•
PC or copier system crash during commu-
nication.
•
USB cable does not connect properly dur-
ing communication.
1.
Turn the copier off, and then check if the
USB cable is connected properly or not.
2. After checking the USB cable carefully,
turn the copier on again.
3. If the problem persists, call your service
representative.