Konica Minolta Fujitsu ScanSnap iX500 Operation Guide - Page 47

Turning the ScanSnap OFF 1. Close the ADF paper chute (cover). Turning the ScanSnap ON/OFF Example: When a USB cable is used for connection D The [Scan] button turns off. The ScanSnap Manager icon changes as shown below. From ( when a wireless LAN is used for connection) to . From ( when a wireless LAN is used for connection) to . ATTENTION z Close the ADF paper chute (cover) after putting the extension back. z If moving the ScanSnap, first turn the power OFF and remove all cables. The bottom part of the ScanSnap may become hot when the ScanSnap is being used but this does not affect ScanSnap operation or cause any physical harm. Be careful not to drop the ScanSnap when carrying it. HINT z If the Wi-Fi switch is off, the power of the ScanSnap and the computer operate together. If you keep the ScanSnap connected to the computer, you do not have to worry about turning the power ON/OFF. z With some computers, it may take 2 to 3 minutes until the light of the [Scan] button goes out after the computer is turned off. 47