Konica Minolta bizhub 652 bizhub 652/552 Network Scan/Fax/Network Fax Operatio - Page 228

10.4 Administrator Settings (G3) 10 Closed Network RX Specify whether to use the Closed Network RX function. To use the function, specify a password that is used for Closed Network RX. Press [No] to clear the entered setting and then specify a password using the keypad. (up to 4 digits) Reference - Closed Network RX is only available when the receiver has password transmission function. Forward TX Setting You can forward received documents to a preset recipient. To receive data with the G3 fax function, if two units of Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Administrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to specify the forward destination setting for each receiving line. For details on [Individual Receiving Line Setup], refer to page 10-19. Item [Output Method] [Forward Dest.] [Select Line] Description [Forward & Print]: Received document are forwarded and printed on this machine. [Forward & Print (If TX Fails)]: Received documents are forwarded and, if forwarding fails, are printed on the machine. Allows you to enter a fax number using up to 38 digits. It is also possible to select it from the address book. If two units of the Fax Kit FK-502 are installed, specify the line used to forward received faxes. The following items are not available if Forward TX Setting is configured. - PC-Fax RX Settings - TSI User Box Settings - Memory RX Setting bizhub 652/552 10-23