Konica Minolta bizhub 652 bizhub 652/552 Network Scan/Fax/Network Fax Operatio - Page 49

4.1 To begin operation 4 4 Registering the basic information This section explains the necessary settings and registrations before using the fax and scan functions of this machine. 4.1 To begin operation The following registrations are required in order to use this machine. 4.1.1 Environment and device requirements The following environment and devices must be prepared to use various functions of this machine. Functions Network scan function G3 fax function Network fax function Internet Fax IP Address Fax Environment and device • Connection of network cable • Network settings • Installation of the optional Fax Kit FK-502 • Connection of modular cable • Connection of network cable • Network settings • Installation of the optional Fax Kit FK-502 • Connection of network cable • Network settings 4.1.2 Connection and settings of network cable To use the function of this machine that sends image data over the network, such as the Network Scan and Network Fax functions, connection and settings of the network cable are required. Connection of network cable Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector on the machine. bizhub 652/552 4-2