Konica Minolta bizhub C654 bizhub C654/C754 Copy Operations User Guide - Page 88

15 [Original Settings] To display: [Copy] - [Application] - [No. of Originals] - [Original Settings] Set the options to scan originals correctly based on their properties. Settings [Original Setting] [Despeckle] [Blank Page Removal] [Binding Position] [Original Size] [Original Direction] Description Set the options to scan originals correctly based on their properties. • [Mixed Original]: Even for an original containing pages of different sizes, by using the ADF, you can scan data while the size of each page is detected. If the originals have the same widths, select [Same Width]. If the originals have different widths, select [Different Width]. • [Thin Paper Original]: Reduce the original feed speed of the ADF to prevent the original from getting caught. • [Z-Folded Original]: The size of the original - even folded originals - can be detected accurately. • [Booklet Original]: Scan a catalog with the staples removed as a 2-sided original, make a 2-sided copy, and staple the center of the paper in the same manner as the original catalog. Scan originals using the ADF while removing dust on the Slit Scan Glass. It takes longer to finish scanning, compared to the normal operation. Blank pages contained in the original loaded into the ADF are skipped when the original is scanned. Select this check box when scanning an original which contains blank pages. Blank pages detected are not counted as original page. When scanning a 2-sided original, select the original binding position to prevent the binding positions be reversed between the front and rear faces. • [Auto]: The binding position is automatically set. When the long side of the original is 11-11/16 inches (297 mm) or less, the binding position is set to the long side of the paper. When the long side of the original exceeds 11-11/16 inches (297 mm), the binding position is set to the short side of paper. • [Left Bind]: Select this option when the binding position is set to the left of the original. • [Right Bind]: Select this option when the binding position is set to the right of the original. • [Top Bind]: Select this option when the binding position is set to the top of the original. If the size of the original is not detected correctly, select a key indicating the size of the original to be scanned. If the machine cannot detect the size of irregular sized originals or photos, manually specify the size. Specify the orientation of the loaded original. Tips - To use [Booklet Original] in [Original Setting], the optional Finisher and Saddle Stitcher are required. Related setting - In case blank pages are not detected correctly even though scanning has taken place with [Blank Page Removal] enabled, adjust the detection level for blank pages. For details, refer to page 16-6. bizhub C754/C654 15-11