Konica Minolta bizhub PRESS C70hc IC-601 Color Centro User Guide - Page 180
Repeat from Step 4 to Step 9.
View all Konica Minolta bizhub PRESS C70hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
11.11 Create the CMYK-CMYK Device Link Profile 11 [Measurement] screen appears. 3 From [Instrument], select the instrument to use for the measurement. According to the selection, the chart image appears on the upper-right of the screen. % [i11Sis (UV Filer)] returns the measurement result with the UV cut filter. 4 Specify the copy number of the chart outputting to [Copies]. 5 Click [Output] to print the chart. 6 Click [Start] to start the measurement. % According to the selected instrument, the operation screen appears. Follow the instructions on the pages that follow. % The current position of measurement appears on the chart image of the upper-right of the screen. % If you measure a wrong line, a warning message appears. You can select either to try again with the correct line or to proceed to the next line. % For detailed information on how to operate, refer to user's guide of each instrument. % To stop the measurement, click [Stop]. % After the acquirement of measurement data, [Save the Result] becomes available. % The value of each patch appears in the measurement result list. 7 Click [Save the Result] after completing the measurement. [Save As] screen appears. 8 Specify the saving place and file name, and click [Save]. [Measurement] screen returns after saving the measurement result file. 9 Click [OK]. [Feedback] screen returns. On [Feedback] screen, the measurement data is displayed. 10 Click [Execute Feedback]. Profile is calculated. After completing calculation, [Measurement] screen appears. 11 Repeat from Step 4 to Step 9. IC-601 11-68