Konica Minolta bizhub PRESS C70hc IC-601 Color Centro User Guide - Page 87
Adjust the Spot Color Manually
View all Konica Minolta bizhub PRESS C70hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
9.5 Adjust the Spot Color Manually 9 9.5 Adjust the Spot Color Manually You can adjust the CMYK values of the spot color on [Spot Color] screen. The result of adjustment is reflected to the preview area immediately. You can also print to confirm the colors of [Before Adjustment] and [After Adjustment]. This section describes how to adjust the spot color manually. To adjust the spot color manually, use [Spot Color] screen. 1 Specify the CMYK values to [Manual Adjustment] - [C], [M], [Y] and [K] for the spot color selected from the list on [Spot Color] screen. According to the settings, the preview area of [Manual Adjustment] - [Before Adjustment] and [After Adjustment] are updated. % For each color, specify the value (from "0" to "100"). % When you input below the decimal point, the value rounded down is displayed. % Similar operation can be done when you change the value of [C(%)], [M(%)], [Y(%)] and [K(%)] of the list on [Spot Color] screen. 2 Confirm the preview of [After Adjustment], and repeat Step 1 as required. 3 Click [Test Print]. [Confirmation Print] screen appears. 4 Specify [Paper Tray] and [Paper Size]. 5 Click [Print]. Test printing is executed. 6 Confirm the test printing and repeat Step 1 to Step 5 as required. % When you execute fine adjustment, go to the step described on page 9-11. % When you save the adjusted spot color, go to the step described on page 9-13. IC-601 9-10