Konica Minolta bizhub PRESS C70hc IC-601 Color Centro User Guide - Page 189
Edit the Existing Point Color, Delete the Existing Point Color
View all Konica Minolta bizhub PRESS C70hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
11.12 Edit the CMYK -CMYK Device Link Profile 11 3 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color (below the [Result]) and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 4 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Edit the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to edit. The input color is displayed on the lower of the Sample Color (below [Result]). 2 From [Effective Range], select the effective range. The color conversion result of the adjusted point is displayed on [Result] and [After adj.]. In addition, the color of [Result] is displayed on the upper-left of the Sample Color and the color of [After adj.] is displayed on the upper-right. % When you select [Narrow], the result of adjustment has influence on the color range which includes only the near colors to the input color. % When you select [Wide], the result of adjustment has influence on the color range which includes the colors which are away from the input color. % When you select [Normal], it has influence on the middle range between [Narrow] and [Wide]. % You can specify [Effective Range] per adjustment point. % The values displayed on [Result] and [After adj.] are the value to which Input curve and color con- version table are applied. (Output curve is not applied to the curve yet.) 3 Enter the value into [Add. Value] to make the value of [After adj.] the target value. % When you discard the setting of [Add. Value], click [Undo] of [Point Color Adjustment]. Delete the Existing Point Color 1 From [Adjustment Point], select the adjustment point (input color) to delete. 2 Click [Delete]. The selected adjustment point is deleted. IC-601 11-77