Konica Minolta bizhub PRESS C71cf bizhub PRESS C71cf Quick Guide - Page 120
The JAM code J-1714 is displayed
View all Konica Minolta bizhub PRESS C71cf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
5.5 A media feeding error occurs The JAM code J-1714 is displayed The jam code J-1714 is displayed when the machine detects that the delivering rollers stop while conveying paper at a low speed before printing. Follow the procedures below to solve the problem: STEP 1: Checking the Media Tension Check if the tension setting of the media has been made properly. % For details, refer to page 3-13. STEP 2: Checking the Position of the Media and Parts Check if the media or other parts set in the right position. % For details, refer to page 4-16. STEP 3: Cleaning the Adhesive Sticking on the Parts Clean the media guide and the media guide of the leading section or the delivering section if it is dirty with adhesive. % For details, refer to page 4-4 and page 4-9. STEP 4: Clearing Paper Jams Open and close the front door of the main body to clear the jam code. STEP 5: Changing the Tension Setting If the jam code J-1714 is displayed repeatedly after the procedure mentioned above is performed, lower the tension by one level. % For details, refer to page 5-27. 5-26