Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 45
If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
bizhub PRO 1100 8 If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing Adjustment] screen. 9 Use the touch panel keypad or the keypad on the control panel to enter the setting data. - Use [+/-] to specify the value to be positive or negative. - Press [Set] to change the Current Value. - Adjustment Range: [Tray 1] to [Tray 5], [Bypass]: ([Lower]) -30 to +30 ([Higher]) (1 step = 0.1 mm) 10 Repeat steps 4 to 9 until the desired result is obtained. 11 Press [Return]. The screen returns to the [Printer Adjustment Menu] screen. 2 2-19
2-19
bizhub PRO 1100
2
8
If any adjustment is required, press [Exit PrintMode] to return to the [Restart Timing
Adjustment] screen.
9
Use the touch panel keypad or the
keypad
on the
control panel
to enter the setting
data.
-
Use [+/-] to specify the value to be positive or negative.
-
Press [Set] to change the Current Value.
-
Adjustment Range: [Tray 1] to [Tray 5], [Bypass]: ([Lower]) -30 to +30 ([Higher]) (1 step = 0.1 mm)
10
Repeat steps 4 to 9 until the desired result is obtained.
11
Press [Return].
The screen returns to the [Printer Adjustment Menu] screen.