Konica Minolta bizhub PRO 1100 bizhub PRO 1100 Daily Maintenance Guide - Page 59
press [Adjustment Start].
View all Konica Minolta bizhub PRO 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
8 Press [a] to [d] of each point, and enter the adjustment value using the keypad, [,], or [+] on the screen. - If the printing position is misaligned to the minus (-) side, enter a positive value (+). If the printing position is misaligned to the plus (+) side, enter a negative value (-). - To reset a numeric value, press [Clear]. - To switch the positive sign (+) and negative sign (-), press [+/-]. 9 When entry processing is completed, press [Adjustment Start]. bizhub PRO 1100 10 Press Start on the control panel. A test chart is printed out. 2 11 Check a gap of the printing position refering the printed out chart. Repeat steps 7 to 10 until all gaps between the front and back sides are cleared. 2-33
2-33
bizhub PRO 1100
2
8
Press [a] to [d] of each point, and enter
the adjustment value using the keypad,
[
,
], or [
+
] on the screen.
-
If the printing position is misaligned to the
minus (-) side, enter a positive value (+). If the
printing position is misaligned to the plus (+)
side, enter a negative value (-).
-
To reset a numeric value, press [Clear].
-
To switch the positive sign (+) and negative
sign (-), press [+/-].
9
When entry processing is completed,
press [Adjustment Start].
10
Press
Start
on the
control panel
.
A test chart is printed out.
11
Check a gap of the printing position refering the printed out chart.
Repeat steps 7 to 10 until all gaps between the front and back sides are cleared.