Kyocera ECOSYS M3660idn M3655idn/M3660idn/M3145idn/M3645idn Fax Operation Guid - Page 101

Using Convenient Fax Functions > Using a Connected Telephone Manual Reception Reception is possible after confirming that the telephone line has connected to the sending party. NOTE FAX Automatic Reception has been preset for the receiving mode of this machine. To use Manual Reception, you need to change the receiving mode to Manual Reception. To change to manual mode, refer to the following: Reception Mode (page 8-9) 1 The telephone rings. When there is an incoming call, the telephone connected to the machine makes a ringing tone. 2 Lift the handset. Lift the handset of the telephone. 3 Check if the telephone line has connected to the fax of the sending system. If the destination is a fax machine, you will hear soft beep sounds. If a person answers, you can talk to that person. 4 [FAX] on the Home screen > [On Hook] > [Manual RX] Reception will start. NOTE When using a telephone set that can send tone signals, use the telephone to start the reception of originals with the remote switch function. Remote Switch Function (page 5-36) 5 Replace the handset. When reception starts, return the handset to its original position. 5-35