Kyocera ECOSYS P6130cdn ECOSYS P6130cdn Operation Guide - Page 178
Symptom, Checkpoints, Corrective Actions, Reference, Troubleshooting > Troubleshooting
![]() |
View all Kyocera ECOSYS P6130cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Troubleshooting > Troubleshooting Symptom Irregular horizontal lines ― appear in the image. Checkpoints The altitude is 1000 m or ― higher and irregular horizontal white lines appear in the image. Corrective Actions Reference Page Select the [Menu] key > [Adjust/ ― Maintenance] > [Service] > [MC] and increase the adjustment value. Increase the adjustment value 1 level at a time from the current value. If there is no improvement after the value is increased by 1 level, increase by 1 level again. If there is still no improvement, return the setting to the original value. Select the [Menu] key > [Adjust/ ― Maintenance] > [Service] > [Altitude Adj.], and set to an elevation one level higher than the current setting. The altitude is 1000 m or ― higher and dots appear in the image. Select the [Menu] key > [Adjust/ ― Maintenance] > [Service] > [Altitude Adj.], and set to an elevation one level higher than the current setting. Paper often jams. 2 or more sheets are overlaps when ejected. (multi feed) Is the paper loaded correctly? Is the paper of the supported type? Is it in good condition? Is the paper curled, folded or wrinkled? Are there any loose scraps or jammed paper in the machine? ― Load the paper correctly. Remove the paper, turn it over, and reload it. Replace the paper with new paper. Remove any jammed paper. Load the paper correctly. page 3-2 page 3-4 page 3-4 page 9-26 page 3-2 Printouts are wrinkled. Is the paper loaded correctly? Is the paper damp? Load the paper correctly. Replace the paper with new paper. page 3-2 page 3-2 9-10
![](/manual_guide/products/kyocera-ecosys-p6130cdn-ecosys-p6130cdn-operation-guide-d594ee0/178.png)