Kyocera ECOSYS P6130cdn ECOSYS P6130cdn Operation Guide - Page 180
Print in B & W, ColorToner Empty, generated during printing will cause
View all Kyocera ECOSYS P6130cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Troubleshooting > Troubleshooting Symptom Checkpoints Corrective Actions Reference Page The color toner is empty. Do you want to continue printing in black and white? If the black toner is remained, the machine continues printing in black and white by selecting [Print in B & W] of [ColorToner Empty]. page 7-12 The machine is emitting Check the room temperature to see if it steam in the area around the is low, or if damp paper was used. paper ejection slot. Depending on the printing environment ― and the paper's condition, the heat generated during printing will cause the moisture in the paper to evaporate, and the steam emitted may look like smoke. This is not a problem, and you can continue printing. If the steam concerns you, raise the room temperature, or replace the paper with a newer, dryer paper. 9-12