Kyocera FS 1020D FS-1020D Operation Guide Rev 1.4 - Page 32
Maintenance Messages, Corrective Action
View all Kyocera FS 1020D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Indicators 3.3.1 Maintenance Messages The following table lists error messages that can be dealt with by the user. Read the explanations carefully. Indicator KM-NET for Clients display Add paper Close top cover Corrective Action The paper has run out. Add paper to the paper cassette (1 or 2) or MP tray. The paper source is displayed in the KM-NET for Clients. The paper cassette is not closed securely. Close the paper cassette properly. The top or front cover is open. Close the cover properly. Table 3-3 Load Cassette # Load MP tray There is data for printing that matches with a paper cassette setting (paper size, paper type), but there is no paper in the paper cassette. Set paper of the size and type specified in the print data into the cassette (1 or 2) to resume printing. When you want to feed from a other paper source, press the key to switch the paper source. The printer prints on the paper size and type set in that particular paper source. The cassette paper size and data paper size are not the same. The printer feeds from the MP Tray when the page in the paper cassette is a different size and type than that specified in the print data. Set paper of the size and type specified in the print data into the MP tray, then press the key to resume printing. When you want to feed from a source other than the MP tray, make sure there is no paper in the MP tray, then press the key to switch the paper source. The printer prints on the paper size set in that particular paper source. Paper jam Feeding the paper having a paper size which does not match the current paper Note size from the MP tray can cause paper jam. Open the printer and clear the paper jam. The location of the paper jam is also indicated in place of #'s. For details on how to clear paper jams, see section 3.4 Paper Jam Removal on page 3-15. 3-7