Kyocera FS 3700 FS-1700/3700 Users Manual - Page 40
Status Printout, CANCEL, ENTER, STATUS
View all Kyocera FS 3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2.2. Operating Procedures 1. Halt the printing program on the computer. The printer continues to print the data it has already received. It is a good idea to set the printer to off-line first. 2. Press the CANCEL key. The message display indicates Print Cancel ? and also the interface from which data is arriving, by the one of the following messages: Parallel Serial Option 3. Press the ENTER key. This clears the printing job on the interface indicated on the mes- * sage display. If the printer is receiving data simultaneously on its interfaces, you must be sure which interface the job you wish to abandon is on. With Print Cancel indicated on the message display, press the + key repeatedly until the interface is displayed on the message display. Then, press the ENTER key to abandon the job. When a few pages have been printed out, the printer stops, ready to begin the next job. * If you donot stop the computer program first, after the printer executes the printing halt, it immediately starts printing again as it continues to receive data from the computer. Status Printout If you want to check the printer's current status, including memory available, and option settings, you can find the information you need on the status page. To print out a status page, the printer must be on-line. Proceed as follows: 1. Make sure the message display indicates Ready . 2. Press the STATUS key. The printer prints a page of status information. The message display indicates Processing during printing of the status page, then returns to Ready . *For a full description of the status page, see next page. Items and values on the status page may vary depending on the printer model and printer's firmware version. 2-8