Kyocera FS 3700 FS-1700/3700 Users Manual - Page 71
Supplying Toner, Keep the toner container as level
View all Kyocera FS 3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4.1. Toner Kit Replacement Supplying Toner Before proceeding, take note of the following: K Do not leave floppy disks etc. lying around while performing this mainte- nance procedure. This procedure tends to raise a little toner dust which can harm magnetic recording media. K Do not attempt to reuse the waste toner remaining in the toner container. K Use only the toner kit exclusively designed for the printer. Use of a toner kit intended for use with other printer models may damage the printer and void the warranty. To replace the toner container, proceed as follows. 1. Open the printer's top cover all the way. Top Cover 2. Press the toner container release lever (Green ) to release the old toner container from the printer. Remove the old toner container as gently as possible. Keep the toner container as level as possible while removing. 3. Put the old toner container in the plastic bag supplied with the toner kit. Dispose of the toner container. The old toner container may be in- cinerated without the risk of generating harmful gas. Plastic Bag 4. Take the new toner container from its bag. With the label side down, thoroughly shake the toner container (in the direction of the arrow) ten times or more to loosen and mix the toner inside. Old Toner Container Toner Container Release Lever (Green ) Old Toner Container New Toner Container 4-2