Kyocera FS-C5150DN FS-C5150DN/5250DN Operation Guide - Page 143
C 12345 3 Adjust Cyan and Y 12345 3 Adjust Yellow
UPC - 632983017166
View all Kyocera FS-C5150DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
>>M 12345 3 MH=00000 MV=0 Using the Operation Panel 4 Press U or V repeatedly until >>M 12345 3 appears. 5 Press [OK]. 00000 or 0 will be displayed for each value and the cursor (_) will flash under the H value. 6 In the color registration correction chart printed in Print Registration Chart above, note the numbers of the sections in the magenta H and V charts where the lines most closely coincide as a single straight line. In the left example, the value would be B. >>M 12345 3 MH=B0000 MV=0 7 Press U or V until that value is displayed. >>M 12345 MH=00000 MH-1 MH-2 MH-3 MH-4 MH-5 3 MV=0 MV-3 8 Use Y and Z to move the cursor right and left. Perform the same operation as you did for the H value in order to find the V values in the color registration correction chart, and select those values on the operation panel as well. 9 Press [OK]. OK? and each of the entered values will be displayed. If the numbers shown are correct, press [OK]. This completes the settings for magenta. Now continue to the settings for cyan and yellow. C 12345 3 (Adjust Cyan) and Y 12345 3 (Adjust Yellow ) These options make detailed corrections to the registration for cyan (blue) and yellow. 10 After completing the settings for magenta in step 9 above, press the V key. >>C 12345 3 and >>Y 12345 3 are displayed. As with magenta, note down the values for cyan and yellow from the color registration correction chart. 11 After completing the settings for all three colors, press [MENU]. The display returns to Ready. This completes the detailed color registration correction. Note As confirmation, try printing the color registration correction chart again. If the section where the lines most closely coincide as a single straight line is not 0, redo the settings again from step 4 above. IMPORTANT If the problem of skewed-color printout still persists even after correcting the color registration, call for service. 4-85