Kyocera FS-C5150DN FS-C5150DN/5250DN Operation Guide - Page 164

Troubleshooting Message Load Cassette # (A4)/(PLAIN) Load MP Tray (A4)/(PLAIN) Low security Corrective Action The paper cassette matching the paper size and paper type of the print job is empty. Load paper into the paper cassette as displayed in place of #. Press [GO] to resume printing. If you want to print from a different paper source, press U or V to display Use alternative? and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] and printing starts. There is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray. Press [GO] to resume printing. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) If you want to print from a different paper source, press U or V to display Use alternative? and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Settings > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] and printing starts. This message is displayed when Low was selected in Security Level. Memory overflow Press GO Memory card error ## Press GO No multi copies Press GO No power supply Cassette Original toner installed Paper jam Paper loading The total amount of data received by the printer exceeds the printer's internal memory. Try adding more memory. Press [GO] to resume printing. You can abandon printing by pressing [Cancel]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. For more information, refer to Auto Error Clear (Auto error clear setting) on page 4-60. A memory card error has occurred. Look at the error code given in place of ## and refer to USB Memory and Memory Card Errors on page 6-10. To return the printer to the print-ready status, press [GO]. Multi copies cannot be printed because RAM disk is disabled or the hard disk is not installed. Try adding more memory or installing hard disk, and configuring the RAM disk settings. This message is displayed when the optional paper feeder PF-530 is not connected to a power source and COATED (coated paper) is selected as the paper type setting. Connect it to a power source via the printer. Displayed when the installed toner is the original Kyocera product. A paper jam has occurred. The location of the paper jam is indicated in place of the #'s. For more information, refer to Clearing Paper Jams on page 6-11. The selected cassette is being prepared. Paper path error Check the toner container There is no paper cassette in the printer, or the cassette is not inserted properly. After reinserting the paper cassette, you should be able to print. When two or more optional feeders are installed and the lowest one is selected, the same message will appear if any of the upper paper feeder and the printer cassette is improperly installed. The toner container is not correctly installed. Open the top cover and correctly reinstall it. 6-8