Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 161

Copying Functions Original Size Standard Sizes 1 Standard Sizes 2 Others Original Zoom Paper : 210x297mm Size Entry : 100% : A4 Preview Status Add Shortcut Copies X (50 - 432) 297 mm # Keys Y (50 - 297) 210 mm If [Size Entry] is selected, press [+] or [-] to specify the horizontal size (X) and the vertical size (Y). Press [# Keys] to enter the size directly using the numeric keys. 5 Press [OK]. 6 Press the Start key to start copying. # Keys Cancel OK 10/10/2010 10:10 4 Paper Selection Select the paper source that contains the required paper size. NOTE: Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper Settings on page 9-4). When printing on paper that is wider than the paper previously used, dirt on the conveying guide may soil the edges of the paper infrequently. If you find that the paper is soiled, use the provided cleaning cloth to clean the conveying guide. (refer to Conveying Guide on page 11-18) Selecting the Cassette Use the procedure below to select the paper supply cassette. 1 Press the Copy key. 2 Place the originals on the platen. 3 Press [Org./Paper/Finishing] and then [Paper Selection]. Paper Selection Original Zoom Paper : A4 : 100% : A4 Preview Add Shortcut Status Auto Cassette A4 Plain A3 Plain A4 Plain A4 Plain Copies 4 Press the key of the paper source corresponding to the required paper size. The cassette in which the paper is loaded is selected. If [Auto] is selected, the paper matching the size of the original is selected automatically. A4 Plain MP Tray 5 Press [OK]. MP Tray Paper Set. 6 Press the Start key to start copying. Cancel OK 10/10/2010 10:10 4-3