Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 312

Default Setting (System Menu) Scan Resolution Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi, 200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal. Use the procedure below to select the default resolution setting. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Scan Resolution. 3 Select the default resolution. 4 Press [OK]. Color Selection Select the default color mode for scanning documents. The available default settings are shown below. Color mode Auto Color (Color/Gray) Auto Color (Color/B & W) Full Color Grayscale Black & White Description Automatically recognize whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Grayscale. Automatically recognize whether the document is color or black and white, and scan color documents in Full Color and black and white documents in Black and White. Scan document in full color. Scan document in grayscale for smoother and finer finish. Scan document in black and white. File size is smaller than Full Color or Grayscale. Use the procedure below to select the default color mode. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Color Select.Select the default color mode. 3 Press [OK]. File Format Select the default file type to send the scanned originals. The available default settings are shown below. Item PDF TIFF JPEG XPS High Comp. PDF Description Send files in PDF format. Send files in TIFF format. Send files in JPEG format. Send files in XPS format. Send files in High Comp. PDF format (refer to page 6-16). 9-18