Kyocera TASKalfa 4500i 3500i/4500i/5500i Operation Guide Rev-1 2011.4 - Page 363
Drum Refresh1, Default Setting System Menu, Tone Curve Adjustment, Adjustment/Maintenance
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
Default Setting (System Menu) Use the procedure below for normal adjustment. 1 Press the System Menu key. 2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of Tone Curve Adjustment. 3 Press [Start]. A pattern is printed. Check that the number "1" is printed at the bottom of the pattern. 4 As shown in the illustration, place the printed side down on the platen with the edge with the arrows toward the back. 5 Press [Start]. The pattern is read and adjustment begins. The second pattern is output. 6 Check that the number "2" is printed at the bottom of the pattern and repeat steps 4 to 6 to read the pattern. 7 Press [OK] in the adjustment end confirmation screen. Drum Refresh1 Refresh the drum when image blur appear on images in copies. Takes about 90 seconds. NOTE: Drum Refresh1 cannot be performed while printing. Execute Drum Refresh1 after the printing is done. To use [Drum Refresh1], load Ledger or A3 size paper into the Multi Purpose tray. 9 Use the procedure below to refresh the drum. 1 Press the System Menu key. 2 Press [ ], [Adjustment/Maintenance]. 3 Press [ ], [Next] of Drum Refresh1. 4 Press [Execute] to perform Drum Refresh. 5 After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen. 9-69