LG 26LH1DC3 Operation Guide - Page 58

COMMERCIAL MODE INSTALLERMENU - Installer Menu Items 055 through 117 Menu Item 035 Function COMPPORT EN. Value Range 0/ 1 Default Value 1 Brief Description of Function and Comments Set to 1 to enable HDMI. Set to 0 to disable. 038 YPrPb EN. 0/ 1 1 039 REAR AUX EN 0/ 1 1 040 AUTO CAMPORT 0/ 1 1 Set to 1 to enable display panel Component 1 input jacks. Set to 1 to enable display panel Video 1 input jack. Set to 1 to automatically switch to Camport. 046 STRT AUX SRCE 1 ~ Z 255 047 AUX STATUS 0/ 1 053 DIS. CH-TIME 0/ 1 255 Sets the starting AUX source. 0 Set to 1 for M.RI. AUX source to be reported as a channel number instead of Channel O. 0 Set to 1 to disable Channel-Time display. 069 EN. CH-T COL. 0/ 1 1 070 FOR. CH-TIME 0~ 7 2 Set to 1 to enable custom color for the Channel-Time display. Chooses custom foreground color for the Channel-Time display. 071 BCK. CH-TIME 0~ 7 2 073 CH NOT AVBLE 0/ 1 0 075 REVERT CH 0/ 1 0 Chooses custom background color for the Channel-Time display. If set to 1 and channel override is O, '_NOT AVAILABLE" message is displayed when directly accessing a channel not in the favorite channel list. If set to 1 and loss of M.RI. communication occurs, TV tunes to Start Channel. 078 UPN MSB 0 ~ 255 0 079 UPN MSB-1 0 ~ 255 0 080 UPN MSB-2 0 ~ 255 0 User programmable number, most significant byte. User programmable number, most significant byte - 1. User programmable number, most significant byte - 2. 081 UPN LSB 0 ~ 255 0 N 0 082 CHKSM ERROR 0/ 1 1 User programmable number, least significant byte. Enforces rigid M.RI. checksum. 085 HANDSHK TIME 0~ 5 5 Relaxes M.RI. timing to be compatible with PC based Windows-controlled systems. 084 PERMANENT BLK 0/ 1 0 Removes block hours setting for Parental Control and makes block permanent. r'rl 087 REAR RGB EN. 0/ 1 1 Enables RGB1 input. Set to 1 to enable, set to 0 to disable. N 088 EN NOISE MUTE 0/ 1 1 J If set to 1, mutes audio if no signal is present. 090 KEY LOCK 0/ 1 0 r" 091 YPrPb2 EN. 0/ 1 1 If set to 1, keyboard is locked out, IR is still functional. Set to 1 to enable Component 2 input jacks. 0 092 RGB2 ENABLE 0~ 2 2 Enables Video 5 input. Set to 1 for Composite Video or 2 for S-Video. Set to 0 to disable. o 093 RJPAVAILABLE 0/ 1 0 Set to 1 to enable. I'rl 094 SAP MENU EN 0/ 1 1 Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu. 096 DEE ASR RATIO O, 1,2, 4, 5 2 102 ATSC BAND 0~ 4 4 Sets default aspect ratio at power up. See detailed descriptions and item 106. Selects ATSC band. 103 ATSC TUNE MODE 0 / 1 104 START MINOR CH 0 ~ 255 1 Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels. 0 Selects Minor start channel. Set 0 for NTSC. Not O, sets Minor channel number. 106 ASP RATIO LOCK 0/ 1 107 BANNER SELECT N/A 116 VIDEO MUTE EN 0/ 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. N/A Not applicable. 0 Set to 0 for normal, set to 1 for Blank. 117 FACT DEFAULT 0/ 1 0 O-Normal. 1 -Loads factory default presets of all above settings. 58