LG 26LH1DC3 Operation Guide - Page 59
LH7 DC3/4/5
![]() |
UPC - 719192172227
View all LG 26LH1DC3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
INSTALLERMENU Detailed Descriptions of Installer Menu Items 000 - INSTALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 OOS - CHAN LOCK (Channel Lock) CHAN LOCK is ideal if the system must always be on the same channel. Changing channels with Channel Up/Down or keypad numbers is impossible. Channel Lock is inactive if set to 0 (default). 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff. The POWER MANAGE function is for saving energy. If set to 0, Power Manage is Off. Settings range from 0 - Z with 1 - 7 representing the hours that the TV will remain On, unless there has been activity from either the control panel or remote control. Generally, this feature is used in connection with START CHANNEL (Installer item 004) where the start channel may, for example, be set to 3 or 4. If the start channel is 3, then the 26LH1 DC3/4/5 will remain locked on Channel 3. *Note: For Items OOZ 008 and 009 For legacy reasons, the scale used is 0 - 63. The PTC software will translate this to the 0 - 100 scale used by the TV. 002 - AC ON (AC Power Switchable) If set to 1, allows the 26LH1DC3/4/5 to turn On just by applying AC power. Pressing the On button is not necessary. This is desirable if the 26LH1 DC3/4/5 is To translate a TV volume level to the installer menu value, use the following formula: Installer Value = TV Value x 63 100 plugged into a cable box or a power outlet controlled by Enter only the whole number (disregard fractions). a wall switch. Use ADJ Left/Right arrow to choose 0 or N 1 where 0 is the default is Off, and 1 is On. 0 *Note: f set to 7 (On), the 26LH7 DC3/4/5 does not respond to 007 - STRT VOLUME (Start Volume) On/Off commands from either the remote or the display control This function allows the Installer to determine the initial r'rl panel, and the SLEEP TIMER is also nonfunctional. volume level setting when the 26LH1 DC3/4/5 is turned N J 003 - BAND/AFC (Band/Automatic Frequency On. This feature is useful for an in-house information r" Control) channel, since the 26LH1 DC3/4/5 would always select Selects the tuning band. There are 4 possible settings that volume level when it is turned On. The range of 0 for this option: values are 0 - 63,255. If 255 is selected, the current I'rl volume level will be retained in memory when the 0 = Broadcast 2 = HRC 1 = CATV 3 = IRC 26LH1 DC3/4/5 is turned Off; at turn On, the volume level will be automatically set at the previous or last level. If some channels were not found by Auto Program, select the appropriate Band setting here and add the channels using the Channel List option in the Channel Menu. 008 - MIN VOLUME (Minimum Volume) This function determines the minimum volume level 004 - STRT CHANNEL (Start Channel) If active, this function allows you to determine the initial channel number when the 26LH1DC3/4/S is turned On. This feature is useful for an in-house information channel, since the 26LH1 DC3/4/5 would always select that channel when it is turned On. Setting this to 255 causes the last channel viewed when the 26LH1DC3/4/S was turned Off, to be the tuned to channel when the 26LH1DC3/4/5 is turned On again. allowable with the VOLUME (VOL) Up/Down control. In this way, for example, someone cannot set the volume too low to hear. The value range is from 0 to 63; -change values with ADJ Left/Right arrow. The factory default is 0, which provides the full range of volume control, if item 009 MAX VOLUME is also set to 63;. It may be best to set the same value on every 26LH1 DC3/4/5. *Note: The minimum volume level cannot have a value setting higher than the MAX VOLUME level (described below). 255 = Last channel 126 = Map toChannel3. 1-125 = Ch X 0 = Aux 127 = Map to Channel 4. *Note: Item 004 STRT CHANNEL cannot be set to 0 if item 093 RiP AVAILABLE is set to "7 " 009 - MAX VOLUME (Maximum Volume) This function determines the maximum volume level allowable with the VOLUME (VOL) Up/Down controls. In this way, for example, someone can not set the volume level high enough to disturb others. (Continued on next page) 59
![](/manual_guide/products/lg-26lh1dc3-operation-guide-e88ad8f/59.png)