LG 26LH1DC3 Operation Guide - Page 60

COMMERCIAL MODE (Continued from previous page) 029 - OLD OCV (On Command Video TM) The value range is 0 to 63, with 63 as the default, which gives the user the full range of volume control, if item 008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow keys. It may be best to set Set to 1 for operation with systems from On Command Corporation. 030 - ACK MASK M.RI. Communication Parameter. Leave at default setting the same value on every 26LH1 DC3/4/5. *Note: The maximum volume level cannot have a value setting lower unless changed by Pay-Per-View provider. When set to 1, changes M.RI. for some OCV boxes. than the MIN VOLUMElevel(describedpreviously). O51 - POLL RATE 010 - MUTE DISABLE M.RI. Communication Parameter. Selects Poll Rate for Enables or disables sound mute function. If set to 1, sound cannot be muted, mute is disabled. If set to 0, sound can be muted. M.RI. Leave at default setting unless changed by Pay-Per-View provider. Step size of 16 ms. 032 - TIMING PULSE 011 - KEY DEFEAT (Keyboard Defeat) If set to 1, key defeat prevents the end user from accessing the onscreen menus with the display front M.RI. Communication Parameter. Leave at default setting unless changed by Pay-Per-View provider. Sets baud rate. Step size of 4.3; uS. panel--MENU, SELECT, and Left / Right arrow keys and TV/AV do not function. If set to 0, those keys do function. 034 - CAMPORT EN. (Camera Port Enable) Set to 1 to enable Video 2 input on display panel. If set *Note: The menus can always be accessed by pressing MENU on the to 0, Video 2 input on display panel is not functional. Installer remote. N 035 - COMPPORT EN. (Computer Port Enable) 0 015 - SLEEP TIMER Enable/disables display panel HDMI input jack. Set to 0 If set to 1, the SLEEP TIMER feature may be used. If to disable, set to 1 to enable. r'rl set to 0, the Sleep Timer is not available. *Note: The setting above is ignored if Installer item 093 RJPAVAIL ABLE, is set to 1. N 016 - EN TIMER (Enable On/Off Timers) J > If set to 1, Timer function is available to user. Set to 0 038 - YPrPb EN. (Rear Component Video Enable) r-" to disable On/Off Timer functions. (Clock must be set in Set to 1 to enable display panel rear Component Video 0 order to use Timers.) 1 input. Set to 0 to disable display panel rear Component Video I'rl 017 - ALARM 1 input. Gives the installer the option of making the Alarm function available to the end user. If set to 1, Alarm 039 - REAR AUX EN. (Rear Aux Enable) function is available to end user. Set to 1 to enable display panel rear AUX (Video 1) Set to 0 to disable the Alarm function. input. *Note: Clock must be set before the Alarm function will work. Set to 0 to disable display panel rear AUX (Video 1 ) input. 021 - V-CHIP (Parental Control) Set to 1 to activate V-Chip (Parental Control); have it available to end user to filter and control or otherwise restrict programming content that can appear. Set to 0 to turn V-Chip feature Off, not available to user; no programming restrictions can be set. 022 - MAX BLK HRS (Maximum Block Hours) Sets hours from 0 to 99 for the maximum V-Chip (Parental Control) block hours. Default setting is for 12 blocking hours. 040 - AUTO CAMPORT Set to 1 to automatically switch to Camport when equipment is connected to front Video input. Set to 0 to disable front Video automatic source selection. *Note: This item must be set to 0 in order to enable item 095 RJP AVAILABLEto be set to 1. 046 - STRT AUX SRCE (Start Aux Source) Sets the starting AUX source. Start source if start channel =0 O25 - CAPTION LOCK 1 = Video1 4 = RGB1 7 = Video 3; / S-Video Set to 1 to restore previous caption On/Off state after turn Off. If set to 0, captions are always Off at turn On. (Continued from previous page) 028 - CH. OVERIDE (Channel Override) If set to 1, the user can select channels with either Channel up/down or by direct keypad entry. If set to 0, 2 = Video2 5 = Component 2 255 = Last Aux 3; = HDMI 1 6 = Component 1 047 - AUX STATUS Set to 1 for M.RI. AUX source to be reported as a channel number instead of channel 0. Set to 0 to disable AUX identification change. Controls M.RI. status channel response for AUX inputs. only those channels that are added on the channel list can be selected. (Continued on next page) 6O