LG 32LX3DC Owners Manual - Page 117

Troubleshooting The remote control doesn't work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? ° Correct remote operating mode set: TV, VCR etc2 ° ]nstali new batteries. Power is su_enly turned off * is the sleep timer set? . Check the power controt settings Power interrupted , No broadcast on station tuned with Auto off activated. k._ j r The video function ,does not work, No picture & No sound * Check whether the product is turned on, . Try another channet. The problem may be with the broadcast. * is the power cord inserted into wall power outlet? - Check your antenna direction and/or location. ° Test the wall power outlet, plug another product's power cord into the outlet where the product's power cord was plugged in. Picture appears slowly after switching on * This is normal, the image is muted during the product startup process, Please contact your service center, if the picture has not appeared after five minutes, No or poor color or poor picture ° Adjust Cotor in menu option. • Keep a sufficient distance between the product and the VCR. ° Try another channel. The problem may be with the broadcast • Are the video cables installed properly? • Activate any function to restore the brightness of the picture, Horizontal/ve_ical bars or pic- ture shaking * Check for local interference such as an electrical appliance or power tool_ Poor reception on some channels • Station or cable product experiencing problems, tune to another station. • Station signal is weak, reorient antenna to receive weaker station. ° Check for sources of possible interference. Lines or streaks in pictures • Check antenna (Change the direction of the antenna). 57