LG 42LC2RR Owner's Manual - Page 86
Programming The Remote Control, Programming Codes
View all LG 42LC2RR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below. 2 Press the MENU and MUTE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. 3 Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. 4 Press the MENU button to store the code. After blinking twice, this code is stored. 5 Test the remote control functions to see if the device responds properly. If not, steps 2-5. APPENDIX PROGRAMMING CODES DVD Brand Codes Brand APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024 MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 84 Brand RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 005 006 011 015 007 005 006 019 008 009 018 010 016 025