LG 47LB5RE Owners Manual - Page 31

EXTERNAL EQUIPMENT SETUP Supported Display Resolution (RGB/HDMI[PC]mode) Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.469 70.08 640x480 31.469 37.500 59.94 75.00 800x600 37.879 46.875 60.31 75.00 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 1280x768 47.693 59.99 1360x768 47.700 60.00 1366x768 1280x1024 47.700 64.00 60.00 60.00 47LB5R*/52LB5R* only 1920x1080 66.59 59.93 ! NOTE G To enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set's screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G We recommend using 1366x768, 60Hz (32, 37 ,42inch LCD TV models)/ 1920x1080, 60Hz (47, 52inch LCD TV models) / 1024x768, 60Hz (42 inch PLASMA TV models) / 1360x768, 60Hz (50 inch PLASMA TV models) for the PC mode, these should provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the set. G Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the set. G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality 29