LG 52LB9DF Owners Manual - Page 114
Input Select Command2:b Main Picture Input, To control Power On/Off of the TV.
View all LG 52LB9DF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
APPENDIX 112 APPENDIX 01. Power (Command2:a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit 'FF' data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 02. Input Select (Command2:b) (Main Picture Input) To select input source for the TV. Transmission [k][b][ ][Set ID][ ][Data][Cr] Data 0: DTV Data 1: Analog Data 2: AV1 Data 3: AV2 Data 4: Component 1 Data 5: Component 2 Data 6: RGB-PC Data 7: HDMI1 Data 8: HDMI2 Data 9: HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 03. Aspect Ratio (Command2:c) To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Picture menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Date 0: Auto 1: 4:3 2: 16:9 3: 14:9 (-10) ~ D: 14:9 (0) ~ 17: 14:9 (10) 18: Zoom (-16) ~ 28: Zoom (0) ~ 38: Zoom (16) 39: 1:1 Pixel(Full HD Only) Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In HDMI/DVI(1080i or 1080p)mode, 1:1 Pixel is available. 04. Screen Mute (Command2:d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Screen mute off (Picture on) Data 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] 05. Volume Mute (Command2:e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 06. Volume Control (Command2:f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to 'Real data mapping 1' as shown below. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 07. Contrast (Command2:g) To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 *Refer to 'Real data mapping 1' as shown below. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 08. Brightness (Command2:h) To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code) *Refer to 'Real data mapping 1' as shown below. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] *Real data mapping 1 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100