LG 52LB9DF Owners Manual - Page 26

HDMI/DVI IN RGB IN RGB (PC) EXTERNAL EQUIPMENT SETUP COMPONENT IN 2 When connecting with an RCA cable 1 (DVI) VIDEO AUDIO 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours(Video = yellow, Audio Left = white, and Audio Right = red) DIGITAL AUDIO OUT AUDIO S-VIDEO VIDEO (MONO) AUDIO AV IN 1 EXTERNAL EQUIPMENT SETUP 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) 1 3 Select A V 1 input source using the INPUT button on the remote control. If connected to AV IN2, select A V 2 input source. ! NOTE HDMI/DVI IN RGB IN RGB (PC) G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L(MONO) jack of the set. COMPONENT IN 2 When connecting with an S-Video cable 1 (DVI) VIDEO AUDIO 1 Connect the S-VIDEO output of the VCR to the S-VIDEO input on the set. VIDEO L R S-VIDEO DIGITAL AUDIO OUT ANT IN OUTPUT ANT OUT SWITCH AV IN 1 AUDIO S-VIDEO VIDEO (MONO) AUDIO 2 Connect the audio outputs of the VCR to the AUDIO input jacks on the set. ANTENNA 1 2 RGB IN IN 3 HDMI/DVI IN InsReGrBt(PaC)video tape into the VCR and preAsUDsDIGIPOITLAOALUYTon the VCR. (Refer to the VCR owner's manual.) 4 SeleCctOAMVPO1NinEpNuTtINsource using the INPUT button on 2 the remote control. If connected to AV IN 2 input, select A V 2 input source.(Except 32LB9D*) 1 (DVI) VIDEO AUDIO ! NOTE G The picture quality is improved: ; compared to normal composite (RCA cable) input. S-VIDEO VIDEO L R ANT IN OUTPUT ANT OUT SWITCH CAUTION G Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. 24