LG 55XS2E Owners Manual - Page 78
No Signal Power Off] 15Min Command: f g, Auto Power Off] 4 Hours Command: m n
![]() |
View all LG 55XS2E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
ENGLISH_index 50 23. [No Signal Power Off] (15Min) (Command: f g) Sets the monitor to enter Automatic Standby mode if there is no signal for 15 minutes. Transmission (f)(g)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: On Acknowledgement (g)( )(Set ID)( )(OK/NG)(Data)(x) 26. [Reset] (Command: f k) Performs the reset function. Screen Reset can only be performed in RGB input mode. Transmission (f)(k)( )(Set ID)( )(Data)(Cr) Data 00: Picture Reset 01: Screen reset 02: Initial Settings Acknowledgement (k)( )(Set ID)( )(OK/NG)(Data)(x) * It may not be supported depending on the model. 24. [Auto Power Off] (4 Hours) (Command: m n) Sets the monitor to enter Auto Power Off after 4 hours. Transmission (m)(n)( )(Set ID)( )(Data)(Cr) Data 00: Off 01: 4 hours Acknowledgement (n)( )(Set ID)( )(OK/NG)(Data)(x) 25. [Language] (Command: f i) Sets the OSD language. Transmission (f)(i)( )(Set ID)( )(Data)(Cr) Data 00: Czech 01: Danish 02: German 03: English 04: S panish (Europe) 05: Greek 06: French 07: Italian 08: Dutch 09: Norwegian 0A: Portuguese 0B: P ortuguese (Brazil) 0C: Russian 0D: Finnish 0E: Swedish 0F: Korean 10: C hinese (Mandarin) 11: Japanese 12: C hinese (Cantonese) 13: Arabic Acknowledgement (i)( )(Set ID)( )(OK/NG)(Data)(x) 27. [Current temperature] (Command: d n) Checks the inside temperature. Transmission (d)(n)( )(Set ID)( )(Data)(Cr) Data FF: Check the status Acknowledgement (n)( )(Set ID)( )(OK/NG)(Data)(x) * Temperature is displayed as a hexadecimal value. 28. [Key] (Command: m c) Sends a key code for the IR remote control. Transmission (m)(c)( )(Set ID)( )(Data)(Cr) Data IR_KEY_CODE Acknowledgement (c)( )(Set ID)( )(OK/NG)(Data)(x) * For key codes, see IR Codes. * Some key codes are not supported depending on the model.
![](/manual_guide/products/lg-55xs2e-owners-manual-78ba1bf/78.png)