LG 55XS2E Owners Manual - Page 82

Fail Over Input Select] Command: m j, IR Operation] Command: t p, Local Key Operation] Command: t o

Get LG 55XS2E PDF manuals and user guides View all LG 55XS2E manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

54 ENGLISH_index 48. [Fail Over Input Select] (Command: m j) Selects an input source for auto switch. * This command is only available when the Fail Over (auto) mode is set to Custom. Transmission (m)(j)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( ) (Data4)...( )(DataN)(Cr) Data 1~N-1 (Input priority: 1 ~N-1) 40: COMPONENT 60: RGB 70: DVI-D 90: HDMI1 91: HDMI2/OPS 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 98: OPS C0: DISPLAYPORT Data N: E0: INTERNAL Memory E1: USB E2: S D CARD Acknowledgement (j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) ...(DataN)(x) * Some input signals may not be supported on some models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * Only values under Data N (e.g. E0, E1, E2) are allowed as the last data value and may not be supported depending on the model. * This feature operates as the last input and supports data in DTV format. 49. [IR Operation] (Command: t p) Configures the IR operation settings of the product. Transmission (t)(p)( )(Set ID)( )(Data)(Cr) Data 00: L ocks off all of the keys 01: L ocks on all of the keys except the Power key 02: L ocks on all of the keys Acknowledgement (x)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 50. [Local Key Operation] (Command: t o) Configures the local key operation settings of the product. Transmission (t)(o)( )(Set ID)( )(Data)(Cr) Data 00: Locks off all of the keys 01: Locks on all of the keys except the Power key 02: Locks on all of the keys Acknowledgement (o)( )(Set ID)( )(OK/NG)(Data)(x) * When the monitor is turned off, the power key works even in the locks on all of the keys (02) mode. 51. [Status] (Command: s v) Checks the current signal status of the product. Transmission (s)(v)( )(Set ID)( )(Data)( )(FF)(Cr) Data 02: Checks whether there is a signal or not 03: Check the PM mode. 07: Checks whether the Top, Bottom and Main temperature sensors are functioning normally. 09: Fan Speed 10: RGB sensing OK/NG (Check Screen) 13: Door State 15: check the current electric current value 16: Humidity 17: Illuminance 18: Rotation(Gyro) State Acknowledgement (v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x) Data Data1 02 (when a signal is found) 00: no signal 01: There is a signal Data Data1 03 (when checking the PM mode) 00: The PM mode is set to Screen On 01: The PM mode is set to Screen Off 02: The PM mode is set to Screen Off Always 03: In Sustain Aspect Ratio mode. 04: Screen Off & Backlight status (Outdoor mode) Data 07 (In the case of checking whether the Top, Bottom and Main temperature sensors are functioning normally) Data1 00: All temperature sensors are faulty. 01: Top normal, Bottom faulty, Main faulty 02: Top faulty, Bottom normal, Main faulty 03: Top normal, Bottom normal, Main faulty 04: Top faulty, Bottom faulty, Main normal 05: Top normal, Bottom faulty, Main normal 06: Top faulty, Bottom normal, Main normal 07: All temperature sensors are normal * The 4th temperature sensor determines whether a malfunction has occurred or not, together with the Top.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
ENGLISH
54
48.
[Fail Over Input Select] (Command: m j)
Selects an input source for auto switch.
* This command is only available when the Fail Over (auto) mode is set
to Custom.
Transmission
(m)(j)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)( )
(Data4)...( )(DataN)(Cr)
Data 1~N-1 (Input priority: 1~N-1)
40: COMPONENT
60: RGB
70: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
98: OPS
C0: DISPLAYPORT
Data N:
E0: INTERNAL Memory
E1: USB
E2: SD CARD
Acknowledgement
(j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4)
...(DataN)(x)
* Some input signals may not be supported on some models.
* The data number (N) may vary depending on the model. (The data
number depends on the number of supported input signals.)
* Only values under Data N (e.g. E0, E1, E2) are allowed as the last data
value and may not be supported depending on the model.
* This feature operates as the last input and supports data in DTV format.
49.
[IR Operation] (Command: t p)
Configures the IR operation settings of the product.
Transmission
(t)(p)( )(Set ID)( )(Data)(Cr)
Data
00: Locks off all of the keys
01: Locks on all of the keys except the Power key
02: Locks on all of the keys
Acknowledgement
(x)( )(Set ID)( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in the locks
on all of the keys (02) mode.
50.
[Local Key Operation] (Command: t o)
Configures the local key operation settings of the product.
Transmission
(t)(o)( )(Set ID)( )(Data)(Cr)
Data
00: Locks off all of the keys
01: Locks on all of the keys except the Power key
02: Locks on all of the keys
Acknowledgement
(o)( )(Set ID)( )(OK/NG)(Data)(x)
* When the monitor is turned off, the power key works even in the locks
on all of the keys (02) mode.
51.
[Status] (Command: s v)
Checks the current signal status of the product.
Transmission
(s)(v)( )(Set ID)( )(Data)( )(FF)(Cr)
Data
02: Checks whether there is a signal or not
03: Check the PM mode.
07: Checks whether the Top, Bottom and Main
temperature sensors are functioning normally.
09: Fan Speed
10: RGB sensing OK/NG (Check Screen)
13: Door State
15: check the current electric current value
16: Humidity
17: Illuminance
18: Rotation(Gyro) State
Acknowledgement
(v)( )(Set ID)( )(OK/NG)(Data)(Data1)(x)
Data
02 (when a signal is found)
Data1
00: no signal
01: There is a signal
Data
03 (when checking the PM mode)
Data1
00: The PM mode is set to Screen On
01: The PM mode is set to Screen Off
02: The PM mode is set to Screen Off Always
03: In Sustain Aspect Ratio mode.
04: Screen Off & Backlight status (Outdoor mode)
Data
07 (In the case of checking whether the Top, Bottom and
Main temperature sensors are functioning normally)
Data1
00: All temperature sensors are faulty.
01: Top normal, Bottom faulty, Main faulty
02: Top faulty, Bottom normal, Main faulty
03: Top normal, Bottom normal, Main faulty
04: Top faulty, Bottom faulty, Main normal
05: Top normal, Bottom faulty, Main normal
06: Top faulty, Bottom normal, Main normal
07: All temperature sensors are normal
* The 4th temperature sensor determines whether a malfunction has
occurred or not, together with the Top.